2ft. Hose -1.5″ Diameter – VMC-1012

VMC - 1012 - 15

A 2ft long suction hose. At each end is 1.75″ couplers to fit other 1.5″ attachments and accessories.

  • 1.5″ Diameter
  • 2ft. Long

Part Number: VMC-1012

3ft. Hose – 2.5″ Diameter – with 1.5″ Adaptor – VMC-1023A

VMC - 1023 A B

A 3ft long suction hose with 1.5″ adaptor. Vaniman white suction hose is corrugated and has a 3:1 compression ratio. Each end has 2.5″ hose end to fit other hoses, attachments, or accessories.  Can fit other 1.5″ attachments and accessories.

  • 2.5″ Diameter
  • 3ft. Long
  • Includes 1.5″ Adaptor

Part Number: VMC-1023A

6ft. Hose – 2.5″ Diameter – with 1.5″ Adaptor – VMC-1023B

VMC - 1023 A B

A 6ft long suction hose with 1.5″ adaptor. Vaniman white suction hose is corrugated and has a 3:1 compression ratio. Each end has 2.5″ hose end to fit other hoses, attachments, or accessories. Can fit other 1.5″ attachments and accessories.

  • 2.5″ Diameter
  • 6ft. Long
  • Includes 1.5″ Adaptor

Part Number: VMC-1023B

StoneVac AM – SLS 3D Printing Vacuum & Powder Recovery – 11051

StoneVac AM dust collector for additive manufacturing

The StoneVac AM for SLS 3D printing is a powerful StoneVac dust collector capable of handling heavier dust, powder and particulates from additive manufacturing processes. This dust collector was designed to meet the demands of high production powder bed 3D printers (metals, Nylon 11, Nylon 12 and more). A bagless dustbin in the unit and powder bucket on the ESD-resistant Accumulator (included) make powder recovery simple and easy.

The Additive Manufacturing model features a brushless motor which nearly doubles standard motor life, meaning the StoneVac AM can easily handle heavy and high volume use.

This vacuum can reclaim the printing powder, breaking most clumps back down to original size (approximately 60 μm) to be reused. (Before reusing powder, remember to do a final sieve of the powder, and then re-mix it in with more unused powder per the recommendations of the printer/powder manufacturer.)

All units are assembled by hand in the USA at our Southern California facility.

Each Unit Features:

  • Powerful & convenient powder recovery
  • Class II, Division 2 vacuum
  • Digital speed control for a variety of applications
  • Long-lasting high-capacity brushless motor
  • Unit designed for 3D printing powder
  • Lab grade HEPA filtration – captures 99.97% of dust at 0.3 microns
  • Automatic self-cleaning filter shaker motor (activates every four hours of dust collector use)
  • Pre-Filter Cyclone Accumulator made of ESD resistant material to capture up to 95% of particulates before they even get to the filter
  • Automatic self-cleaning filter system
  • Bagless design with removable dust bin
  • 4 durable rolling wheel casters for movement
  • Easy maintenance
  • 1 year Vaniman warranty
  • Can also connect to any Vaniman microabrasive sandblaster (including the Master Problast 3 ESD)

Please note: ESD resistant pre-filter cyclone accumulator included; however, unit itself not composed of ESD resistant material.

StoneVac AM Includes:

1x StoneVac AM Unit
2x 2.5″ Vacuum Hose (6′ length)
1x Large ESD-resistant Pre-Filter Cyclone Accumulator
1x 3D Printer Interface Cable

PN: 11051

Instructions:[bsk-pdfm-pdfs-ul id="137" target="_blank" show_date="no" date_format="_m/d/Y"][bsk-pdfm-pdfs-ul id="174" target="_blank" show_date="no" date_format="_m/d/Y"]

StoneVac Filter Replacement Schedule Info

Muffler Suction Noise Reducer – 96028

The Muffler - Noise Reducer

The Muffler dramatically decreases the air noise caused by air being sucked into the point of collection on workstation attachments and accessories. Installed in-line with existing suction hoses, it is ideally placed immediately after the accessory or attachment. Foam dampening material restricts air friction noises, dramatically lowering noise pollution caused during suction operation. Can be used with any system.

Connects to the following:

 

Part Number: 96028